| Specification | |
| CCT | 4500-5000K |
| Fitting Type | T8 |
| Wattage | 100 Watts Equivalent |
| Size (DxL) | 28mm x 2400mm |
| Dimmable | No |
| Certification | CE & RoHS |
| Lumen Output | 4200lm |
| Voltage | 90-277V |
| Power Consump | 35 watts |
| Beam Angle | 120° |
| Approx. Lifepspan | 35,000hrs |
| Warranty | 3 years |
8ft T8 LED Tube Light 35W 120lm/W
- Super efficient - 120lm/W
- 120 degree beam angle
- 8ft (2400mm)
- Available in Natural White from stock
- Non-Dimmable
- Minimum order of 2
- These were easy to fit, to replace fluorescent tubes, and are very bright.Collected via eKomi
- 8ft T8 LED Tube Light 35W 120lm/W is an excellant product and this was delivered promptly. Also easy to use website when ordering this product online, plus a good customer service and information. Would recommend this company to anyone who is looking for this type of product.Collected via eKomi
- Easy to retrofit to replace existing flourescant tube. Comes with specialty starters - soundless and efficientCollected via eKomi
- Direct replacement for neon tubes, easy to fit and good brightness.Collected via eKomi
- Quality product, good priceCollected via eKomi
- What a difference these have made compared to the old school tubes.Collected via eKomi
- Fitted in car port, workshop and another building. Works fine with the measured lumens comparable with the original flourescents.Collected via eKomi
- GoodCollected via eKomi
- Replacement for failed 8ft fluorescent tubes. I'd recommend them to anyone with existing fluorescent fittings speed of fit is great and easy. Quality seems perfect, particularly like that they are 'instant on' unlike the old tubes.Collected via eKomi
- Greeeaaaaatt!!!Collected via eKomi
- It’s was for a garage. I would recommend it to anybody who asks me about led lights Quality is very good.Collected via eKomi
- Good for changing to LED from fluorescent, especially business with lots of lights. Reduces costs quicklyCollected via eKomi
- Have replaced a lot of 8ft flourecent tubes and it's better light at a fraction of the running costs.. perfect.Collected via eKomi
- Great product good serviceCollected via eKomi
- Works fine. Fitting OK.Collected via eKomi
- excellent product and serviceCollected via eKomi
- Great service Great productCollected via eKomi
- 1st class productCollected via eKomi
- I purchased two LED tubes to replace two fluorescent tubes both tubes were over ten years old l did not realise until the new LED tubes were fitted and working how much brighter the new lights were and cheaper to run my garage lights have never been as good l am very pleased l converted my old fluorescent lights to LED. I would highly recommend them if you need to see what you are doing .Collected via eKomi
- Perfect replacement for our old fluorescent tubes.Collected via eKomi
- Simple to install, near comparable light output to the original florescent fitting, at 30% of the energy consumption of the original bulb, which are now no longer available through conventional supply channelsCollected via eKomi
- Excellent bright light for my garageCollected via eKomi
- Excellent product.Collected via eKomi
- Replaced existing fluorescent tubes. This could be done by anyone capable of replacing a tube and starter. Excellent quality and gives good light.Collected via eKomi
- Product did exactly what I would have expected.Collected via eKomi
- Have to see how long it lasts but working well nowCollected via eKomi
- Used in 2off 8ft fluorescent fittings with diffusers in Kitchen. Very difficult to find replacement fluorescent tubes and as one fitting had previously been replaced with an LED tube, decided to replace both tube together. Tubes supplied by ledsave.co.uk slightly lower power (36W instead of 44W for old LED tube) but with similar output. Also supplying a clip and screw to hold the centre of the tube was a very good idea, since the old LED tube did sag considerably in the middle without a clip. The quality of the tube appears excellent and with a 3 year warranty, this is longer than the 2 year warranty on the old LED tube (although even the old tube has been in operation for about 5 years) so I am not expecting to replace them in the near future! I would definitely recommend the 8ft tube to replace any existing fluorescent tube if the fitting is to be retained, since the lower energy use and extended life of LED tubes more than justifies the slightly higher purchase costs.Collected via eKomi
- The two tubes are fitted in the kitchen. Any visitors who might be interested. Works well, but small dents noticed when unpacked.Collected via eKomi
- For Clare bright energy efficiency light Recommended to anyone Awesome qualityCollected via eKomi
- Retrofit for T12 florescent tubes in the garage. Great light for working on the car and really easy to fit. No need for rewiring old fitting saving time and money. Tubes smaller and lighter than originals and quality seems excellent with bright flicker-free light.Collected via eKomi
- Swift service, excellent productCollected via eKomi
- Kitchen light Friends Good.Collected via eKomi
- Very satisfied with the level of light given by these LED tubes. Quality appears to be good, can't comment on the durability as only recently installed. Easily installed.Collected via eKomi
- Replacement tube good instructionsCollected via eKomi
- Great lights, nice and bright compared to the original florescent ones they replaced. Tiny bit of a faf as there is a support clip to add on the light fitting on these 8ft ones (depending on the original florescent light the screw holding the metal cover on place may have one central to the length in which case you will need to make the hole in the clip larger to accommodate the M6 screw, or if there isn't one there drill a small pilot hole and fix it with a self tapping screw). Very good and I would recommend these tubes.Collected via eKomi
- Very brightCollected via eKomi
- Very good product. Purchased to replace 8ft 100W tubes. Replaced tube and starter with the LED ones supplied. Needed to drill larger holes in the central retaining clip so that I could use the existing bolt on the lamp fitting, but a quick job and the lights are looking great!Collected via eKomi
- Needed 8 foot led tube light. Installed looks great. Appears to be good quality.Collected via eKomi
- good price, fast post, great lighting, so goodCollected via eKomi
- ExcellentHigh efficiency - 120lm/W Seems like it will last well as has aluminium heat sink on back Supplied with clip to stop sagging -, nice touch I had to ask for instructions as they were missing but they were emailed to me instantly.Collected via eKomi
- Easy to fit and produce very good lightCollected via eKomi
- easy to install into our old fittings. Better lighting of the area than before too.Collected via eKomi
- All good, they do exactly what they say on the tinCollected via eKomi
- Excellent replacement for standard 8ft tubes. Very bright. Only downside is that they're a tad bendy but a clip was supplied to support the middle so not a problem.Collected via eKomi
- Excellent product,easy to fitCollected via eKomi
These Super Lumen EcoBrite® fluorescent tube replacements are great value and produce an amazing 120lm/w. This tube is 8ft (2400mm) long and features an aluminium heatsink to ensure that the heat produced is taken away from its electronic components giving it great reliability and a long life.
Unfortunately due to postal charges there is a minimum order of 2 for this product.
Consisting of Surface Mounted Diodes, this tube will produce a light output equal to its fluorescent counterpart but consumes up to 60 percent LESS energy.
All of the tube configurations come identical to a standard tube with 2 pins at each end and have an internal driver (The driver is contained within the tube and the tube can be retrofitted easily to existing fittings with starters)
This fittting offers a beam angle of 120 degrees and comes in Natural White (4500-5000K) with a frosted lens, however, other colours and finishes are available on request.
If your fitting does not have a starter, then you will need to make some wiring alterations to your fittings........
If in any doubt, call us and ask to speak to one of our fully qualified electricians!
All LEDSAVE tubes come with a 3 Year Warranty and a 28 Day Money Back Guarantee.
These Super Lumen EcoBrite® fluorescent tube replacements are great value and produce an amazing 120lm/w. This tube is 8ft (2400mm) long and features an aluminium heatsink to ensure that the heat produced is taken away from its electronic components giving it great reliability and a long life.
Unfortunately due to postal charges there is a minimum order of 2 for this product.
Consisting of Surface Mounted Diodes, this tube will produce a light output equal to its fluorescent counterpart but consumes up to 60 percent LESS energy.
All of the tube configurations come identical to a standard tube with 2 pins at each end and have an internal driver (The driver is contained within the tube and the tube can be retrofitted easily to existing fittings with starters)
This fittting offers a beam angle of 120 degrees and comes in Natural White (4500-5000K) with a frosted lens, however, other colours and finishes are available on request.
If your fitting does not have a starter, then you will need to make some wiring alterations to your fittings........
If in any doubt, call us and ask to speak to one of our fully qualified electricians!
All LEDSAVE tubes come with a 3 Year Warranty and a 28 Day Money Back Guarantee.
| Specification | |
| CCT | 4500-5000K |
| Fitting Type | T8 |
| Wattage | 100 Watts Equivalent |
| Size (DxL) | 28mm x 2400mm |
| Dimmable | No |
| Certification | CE & RoHS |
| Lumen Output | 4200lm |
| Voltage | 90-277V |
| Power Consump | 35 watts |
| Beam Angle | 120° |
| Approx. Lifepspan | 35,000hrs |
| Warranty | 3 years |
Related Products
