| Specification | |
| Type | Bulkhead |
| Function | Microwave sensor |
| Wattage | 18W |
| Equivalent fluorescent wattage | 28W |
| CCT | 3000K / 4000K / 5000K |
| Lumen output | 1800lm |
| Efficiacy | 100lm/W |
| CRI | Ra>80 |
| Beam angle | 120° |
| Shape | Round |
| Colour | Black |
| Dimmable | No |
| Driver type | Non-flickering |
| Voltage | 200-240VAC |
| Power factor | >0.95 |
| IP rating | IP65 |
| Construction | Aluminium |
| Dimensions (D x H) | 350mm x 107mmn |
| Certification | CE RoHS |
| Estimated llifetime | >30,000 hrs |
| Guarantee | 5 years |
18W Round Microwave Sensor Die-cast Full Moon LED Bulkhead Light
- Black die-cast aluminium case
- 120 degree beam angle
- IP65
- Microwave Sensor Function
- CCT Switchable (3000K / 4000K / 5000K)
- Nice unit, but awkward to install and no instructions on the DIP switch settings for the microwave sensor. Once that was overcome the unit functions very well and looks good. A worthwhile purchase over all.Collected via eKomi
This EcoBrite 18W Round Die-cast Full Moon LED 2D Bulkhead with Microwave Sensor is ideal for outdoor use around offices, factories and even homes.
A fully adjustable microwave sensor (similar to a PIR sensor) provides additional energy savings and reduced light pollution.
It features a durable, yet attractive, die-cast aluminium housing which provides IP65 protection against the elements.
A simple internal switch allows the selection of three CCT's: 3000K / 4000K / 5000K to suit any required application.
It produces a light output equal to a 28W fluorescent 2D bulkhead but only consumes 18 watts of electricity and is ZERO maintenance - no more buying and replacing 2D tubes!
This is a Microwave Sensor Bulkhead, but it is also available in the following versions:
Standard
3 Hour Emergency
Microwave sensor & 3 Hour Emergency
This EcoBrite 18W Round Die-cast Full Moon LED 2D Bulkhead with Microwave Sensor is ideal for outdoor use around offices, factories and even homes.
A fully adjustable microwave sensor (similar to a PIR sensor) provides additional energy savings and reduced light pollution.
It features a durable, yet attractive, die-cast aluminium housing which provides IP65 protection against the elements.
A simple internal switch allows the selection of three CCT's: 3000K / 4000K / 5000K to suit any required application.
It produces a light output equal to a 28W fluorescent 2D bulkhead but only consumes 18 watts of electricity and is ZERO maintenance - no more buying and replacing 2D tubes!
This is a Microwave Sensor Bulkhead, but it is also available in the following versions:
Standard
3 Hour Emergency
Microwave sensor & 3 Hour Emergency
| Specification | |
| Type | Bulkhead |
| Function | Microwave sensor |
| Wattage | 18W |
| Equivalent fluorescent wattage | 28W |
| CCT | 3000K / 4000K / 5000K |
| Lumen output | 1800lm |
| Efficiacy | 100lm/W |
| CRI | Ra>80 |
| Beam angle | 120° |
| Shape | Round |
| Colour | Black |
| Dimmable | No |
| Driver type | Non-flickering |
| Voltage | 200-240VAC |
| Power factor | >0.95 |
| IP rating | IP65 |
| Construction | Aluminium |
| Dimensions (D x H) | 350mm x 107mmn |
| Certification | CE RoHS |
| Estimated llifetime | >30,000 hrs |
| Guarantee | 5 years |